设为首页 设为收藏

联系方式

 

洛阳松导感应加热科技有限公司 

联系方式:15038554363  

24小时技术热线:15038554363

电 话:0379—60125771

邮 箱:1390003299@qq.com

厂址:河南省洛阳市洛新工业园区

  • 产品
  • 1T中频熔炉

    2T中频熔炉

    5T中频熔炉

    中频熔炉

    中频感应炉

    250kg中频感应炉 ,

    250kg中频感应炉

    500kg中频感应炉

    1T中频感应炉

    2T中频感应炉

    5T中频感应炉

    3T中频感应炉

    全自动石墨喷温锻造感应加热设备

    圆棒,圆钢中频感应加热设备

    中频钨钼烧结炉

    中频感应烧结炉

    钼丝钼块烧结炉

    钢管感应加热炉

    圆钢感应加热炉

    350kW铝圆棒中频感应自动加热生产线

    Φ65mm圆钢中频锻造炉

    300KW中频感应加热设备

    铜棒中频感应加热炉

    Φ70mm圆钢感应加热炉

    电机端环中频钎焊设备

    钻杆端部加热设备

    3T 感应熔炼炉

    30t感应熔炼炉

  • 名称:铜棒中频感应加热炉
    价格:0

  • 分享到:
    产品描述

        
    铜棒中频感应加热炉
     

    一,铜中频感应加热炉说明  

    铜杆中频感应加热炉感应加热炉进行加热铜杆,这是从感应加热炉进行加热钢零件不同,所以制造商需要有丰富的经验和成熟的制造经验有色金属感应加热铜和铜合金的锻造温度范围很窄,加热的感应器设计得非常精确,可以避免铜棒过热并导致晶粒过度生长。另外,设计时要注意铜棒表面  不能燃烧,没有夹子,压痕,表面不能有明显的色差。

     ,技术要求

    1.  生产线名称: KGPS-150kW / 2.5  铜棒中频感应加热炉

    2.  生产线数: 1  

    3.  铜棒中频感应加热炉用途:用于铜棒加热   

    4.  铜棒中频感应加热炉主要工艺参数及技术要求  

    4.1  加热工艺要求:

    4.1.1  铜棒材质:铜棒  

    4.1.2  铜棒规格范围:Φ50  x 78 MM 

    4.1.3  加热温度: 900  °C

    4.1.4  生产率:每分钟 5   ≤400kg / h  

    4.1.5  正常运行时加热稳定,各段之间的温度波动在±  15   以内温度差的的铜棒加热后轴向: (  端和尾部 )    30  ℃; 径向(核心)≤  30  ℃下     

    4.1.6  冷却水供应系统压力大于 0.5MPa  (正常水压大于 0.4MPa   ,  高温为 60  °C  ,  相应的软管压力和接口也需要按安全标准放大。

    1564035487878967.png

    image.png


     

    A, copper medium frequency induction furnace DESCRIPTION

    The copper rod medium frequency induction heating furnace is an induction heating furnace for heating copper rods , which is different from the induction heating furnace for heating steel parts, so the manufacturer needs to have the experience and mature manufacturing experience of nonferrous metal induction heating . Copper and copper alloys have a very narrow forging temperature range, and the heated inductors are designed to be extremely precise, avoiding overheating of the copper rods and causing excessive grain growth. In addition, the design should pay attention to the surface of the copper rod can not be burned, no clips, indentations, the surface can not have obvious color difference.

    , technical requirements

    1. Production line name: KGPS-150kW/2.5 copper rod medium frequency induction heating furnace

    2. Number of production lines: 1 set

    3. Copper rod medium frequency induction heating furnace use: for copper rod heating

    4. Main process parameters and technical requirements of copper rod medium frequency induction heating furnace :

    4.1 Heating process requirements:

    4.1.1 Copper rod material: copper rod

    4.1.2 Copper rod specification range: Φ 50 x 78 MM

    4.1.3 Heating temperature: 900 °C

    4.1.4 Productivity: 5 pieces per minute , ≤ 400kg/h

    4.1.5 The heating is stable during normal operation, the temperature fluctuation between each section is within ± 15 °C; the temperature difference of the copper rod after heating : axial ( end and tail )  30 °C; radial (core) ≤ 30 °C

    4.1.6 Cooling water supply system pressure is greater than 0.5MPa (normal water pressure is greater than 0.4MPa ) , high temperature is 60 °C , the corresponding hose pressure and interface also need to be scaled up to safety standards.

    image.png

    image.png

    http://www.songdaokeji.com/plus/view.php?aid=150


    以下为版全声明 万聪电炉城

    Copyright© 2007-2013洛阳松导感应加热科技有限公司 All Rights Reserved 
    电 话:0379—60125771 手 机:15038554363
    网站正在制作中,随时修改,非正式运行。